From: 	"Tracy, Lyle N" <lyle.tracy@amecfw.com>
To:	Helen Donaldson <HCD@portlandmaine.gov>, "Pickett, Jeffrey S." <jeffrey.pickett@amecfw.com>
CC:	"Pearson, Stuart C." <stuart.pearson@amecfw.com>
Date: 	7/9/2015 8:50 AM
Subject: 	RE: Newbury Street Proposal - Geotechnical Report Review

Hi Helen,

The labor breakdown is as follow:

·         Mid-level geotech engineer:  50 hrs @ $80/hr

·         Associate-level geotech engineer:   20 hrs @ $141/hr

·         Project Manager:  6 hrs @ $141/hr

·         CAD designer:  4 hrs @ $85/hr

·         Project Assistant:  2 hrs @ $63/hr

Please let me know if you need more information or detail.

Regards,
Lyle

Lyle Tracy, P.E.
Associate Geotechnical Engineer
AMEC Foster Wheeler
Engineering and Infrastructure, Inc.

511 Congress Street
Portland, ME 04101

Office:  207-775-5401
Direct:  207-828-3632
Cell:  207-671-6231
lyle.tracy@amecfw.com<mailto:lyle.tracy@amecfw.com>
amecfw.com

From: Helen Donaldson [mailto:HCD@portlandmaine.gov]
Sent: Thursday, July 09, 2015 8:29 AM
To: Pickett, Jeffrey S.
Cc: Tracy, Lyle N
Subject: Re: Newbury Street Proposal - Geotechnical Report Review

Jeff,

Can you tell me how many geotech hours this represents?  I apologize that I wasn't clear about this earlier - we just want to make sure we're comparing apples to apples.

Thanks,
Nell

_____________________________________
Nell Donaldson
City of Portland Planning Division
389 Congress Street
Portland, Maine 04101
874-8723
hcd@portlandmaine.gov<mailto:hcd@portlandmaine.gov>
>>> "Pickett, Jeffrey S." <jeffrey.pickett@amecfw.com<mailto:jeffrey.pickett@amecfw.com>> 7/8/2015 4:49 PM >>>
Ms. Helen Donaldson,

Please see attached letter proposal.
Should you have questions, Please call or email me

Sincerely,
Jeffrey S. Pickett

Jeff Pickett  C.G.
Vice President / Office Manager
Amec Foster Wheeler
Americas
511 Congress Street Suite 200
Portland, Maine 04112 USA
D  207 828 3661
M  207 232 4376
VOIP #709 3661
E Jeffrey.pickett@amecfw.com<mailto:Jeffrey.pickett@amecfw.com>
amecfw.com
[cid:image001.jpg@01D0BA24.3F3807D0]
**This e-mail message and any attachments are for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use or disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message and any attachments. This email is protected by client and attorney privilege and cannot be used in any legal action against the recipient or sender. Thank you.
ü Please consider the environment before printing this email.

[cid:image002.jpg@01D0BA24.3F3807D0]

This message is the property of Amec Foster Wheeler plc and/or its subsidiaries and/or affiliates and is intended only for the named recipient(s). Its contents (including any attachments) may be confidential, legally privileged or otherwise protected from disclosure by law. Unauthorised use, copying, distribution or disclosure of any of it may be unlawful and is strictly prohibited. We assume no responsibility to persons other than the intended named recipient(s) and do not accept liability for any errors or omissions which are a result of email transmission. If you have received this message in error, please notify us immediately by reply email to the sender and confirm that the original message and any attachments and copies have been destroyed and deleted from your system. This disclaimer applies to any and all messages originating from us and set out above. For Canada and the United States: If you believe this is an unsolicited email and do not wish to receive future commercial electronic messages from us, please click unsubscribe@amecfw.com<mailto:unsubscribe@amecfw.com?Subject=Unsubscribe> and include “Unsubscribe” in the subject line.

Please click http://amecfw.com/email-disclaimer for notices and company information in relation to emails originating in the UK, Italy or France.

  ­­